Epoxy Flooring in Comox, BC
Garage, shop & hangar floors built for Comox Valley’s coastal climate.
Priority One Epoxy Flooring installs epoxy flooring in Comox using durable epoxy, polyaspartic and urethane-cement systems for garages, workshops, hangars, marine/RV storage, and light industrial bays. We build every floor around your slab condition, moisture risk, and the realities of coastal use—salt air, wet seasons, rolling loads, fuels and daily traffic.
Looking specifically for epoxy flooring in Courtenay? Visit our dedicated Courtenay epoxy flooring page for local examples and options.
Why Epoxy Flooring Works So Well in Comox
Coastal garages and workspaces see moisture, salt air, grit and constant use—vehicles, boats, RVs, bikes, tools and rolling equipment. Bare concrete dusts, stains, and becomes difficult to keep clean. A properly designed resin system seals the slab, improves cleanability, and adds traction options where needed.
Built for coastal garages, hangars & serious shops
- Moisture-tolerant primers for ground-level and older slabs where vapor is a risk.
- Slip-resistant textures tuned for wet entries, wash areas and workshop zones.
- Chemical resistance for oils, fuels, solvents, cleaners and marine products.
- High-build options for dollies, jacks, tire traffic and equipment loads.
Sealer vs epoxy vs polyaspartic vs urethane-cement
Not every space needs the same build. Some floors benefit from concrete sealing to reduce dusting and staining, while garages and workshops often perform best with epoxy + a durable topcoat. For wet environments, wash-down routines, and heavier exposure, urethane-cement can be the best long-term fit. We’ll recommend the right system based on use, downtime and budget.
Full flake broadcast with a durable topcoat—designed for coastal moisture, vehicles and hobby gear.
Epoxy Flooring Services in Comox & the Comox Valley
One team for residential, aviation/marine and light industrial resin flooring across the Comox Valley. Most projects fall into four service categories:
A. Garages & home workshops • B. Hangars & aviation spaces • C. Marine/RV & storage shops • D. Light commercial & industrial
Garages & Home Workshops
Clean, bright, easy-to-maintain floors for parking, storage and hobbies.
- Full-flake epoxy + durable topcoat systems
- Solid colour and metallic options (where suitable)
- Traction upgrades for wet entries and steps
Hangars, Bays & Equipment Rooms
Durable systems designed for rolling loads, fuels, fluids and frequent use.
- High-build epoxy systems for wear resistance
- Slip-resistant finishes for safer foot traffic
- Options for safety markings and zone layout
Marine, RV Storage & Light Industrial Bays
Systems for wet zones, heavier use, and practical day-to-day cleaning.
- Urethane-cement for wet areas and wash-down routines
- Chemical resistance for oils, cleaners and shop fluids
- Durable builds for pallet jacks, carts and equipment
Our Comox Epoxy Floor Installation Process
Long-term performance comes down to prep and system design. We don’t “paint over” problems—we grind, repair, prime and build the floor correctly so it bonds and lasts.
1) Prep & profiling (diamond grinding)
We mechanically profile the concrete to create the right surface for adhesion—this is the foundation of a long-lasting epoxy or polyaspartic floor.
2) Crack repair & slab corrections
We address cracks, spalls and weak areas before coatings go down. If your slab has moisture risks, we’ll recommend primers and build options that reduce failure risk.
3) System build + texture + topcoat
We install the system suited to your use (epoxy, polyaspartic, or urethane-cement) and set the texture level for the right balance of traction and cleanability.
Fast quote checklist
- Approx. square footage + a few photos
- Use-case: garage, hangar, marine, industrial bay
- Any wash-down or wet cleaning routine?
- Heavy loads: carts, jacks, vehicles, equipment?
Prefer email? info@priorityonepoxyflooring.com
Comox Valley Areas We Serve
We work in Comox and across the Comox Valley (and nearby communities by request).
Not sure if your address is in range? Send your location and a couple photos—we’ll confirm availability, options and next steps.
Comox Epoxy Flooring FAQ
Common questions from Comox Valley homeowners and workshop / hangar owners.
How much does an epoxy garage floor cost in Comox?
Most residential garages fall in the $8–$12 per sq ft range depending on prep, repairs, moisture risk, and finish choice (flake, solid colour, metallic). Hangars and industrial bays are priced by system build, thickness and traffic requirements.
Is epoxy flooring a good fit for coastal humidity and salt air?
Yes—when installed properly. The key is mechanical prep, the right primers, and a system chosen for your space (garage vs wash-down vs industrial use). We account for coastal conditions in the build.
What’s best for hangars or marine workspaces: epoxy or urethane-cement?
It depends on chemicals, traffic and cleaning. Many hangars and shops do well with a high-build epoxy system. For frequent wet cleaning and harsher conditions, urethane-cement can be the better long-term option.
How long does installation take?
Most residential Comox projects take 2–3 days including prep and curing. Larger hangar, marine or industrial projects may be phased to reduce downtime.
Ready to plan your Comox floor?
Tell us your square footage, use-case (garage, hangar, marine, industrial), and any moisture or wash-down needs. We’ll recommend the best system options for performance and value.
- Clear, itemized estimates with options
- Texture / traction recommendations
- Systems built for coastal use
Nearby Cities We Also Serve
On Vancouver Island near Comox and need durable epoxy flooring? We also install resin floors in these nearby communities.
View all Vancouver Island epoxy flooring locations on our Areas We Serve page.
Popular Flooring Systems in Comox
Common resin flooring systems we install in Comox homes, shops and hangars:
Get a Comox Project Quote